Untitled design-54

How to lock sliding closet doors

If you’re looking for the best way to keep your sliding closet doors locked, there are several options available. These include traditional sliding door locks, keyed deadbolts, and keyless locks. Each has its own set of advantages and disadvantages, so it’s important to understand which type of lock is best suited to your needs. A door Manual is a comprehensive guide to help you select the best door for your home or business. A door manual covers all the basics from security to energy efficiency, as well as common and advanced features like locks and alarms, hardware options, insulation performance, colors, materials, etc. With a good door manual to refer to, you can make an informed decision about which type of door is best-suited for your particular application. In this article, we’ll explore the different types of locks available and provide advice on how to choose the right one for your closet door.

Push-button locks

Push-button locks are an ideal choice for sliding closet doors as they are generally easier to install than other types of locks, offer convenience and a degree of security. These manual-locking devices can be found in simple or keyed lock styles and some can even be locked from both the inside and outside.

When installing a push-button lock on both panels of the doors, try to determine which one is hung lower and install the lock on that side first. A low latch will ensure you’re able to line up the buttons without any frustration. To ensure that the door stays closed, slide a catch onto the top panel (the one near where your wall meets your ceiling).

When using push button locks, keep in mind that these do not provide high levels of security as anyone who knows where to press or turn can get into your closet. However, if you are looking for a simpler way to secure your sliding closet doors while keeping family members out – this could be an ideal solution.

Keyed locks

Keyed locks are an ideal choice for keeping sliding closet doors locked and secure. The two main types of keyed locks available are locks with a spring latch and cylinder locks. The main difference between these two lock designs is the way they open, but both types also provide tight, secure security.

Spring latch locks are the most common type of keyed lock. This type uses a single-legged spring lever inserted into a sleeve that extends from the edge of the door into a slot on the frame or floor guide of your closet door frame. Once in place, the spring lever is released when you turn your key in either direction, allowing you to open and close your door with ease.

Cylinder locks work differently than spring latch designs; instead, this type features a double-leg mechanism that fits snugly over one or both sides of your sliding closet doors as an extra layer of protection from forced entry. To use it, you must insert a key into the cylinder lock’s opening located at either side of your doors and turn to activate its internal mechanism; this will cause one side of the closet door’s frames to settle securely onto its opposite counterpart while two protruding legs keep it firmly in place until further input is applied via a second supplied key placed into the second cylinder itself – granting access through infiltration or unlocked access as desired, depending on whether you choose to exit or enter each respective room within any given space graced by such locking devices.

Untitled design-56

Magnetic locks

Magnetic locks are a popular choice for locking sliding closet doors. They are a great solution as they can be easily installed and removed. Magnetic locks work by attaching two pieces of metal either on the door frame (which is called an electromagnet) or on the closet door; one side has magnets, the other has an iron plate. When both pieces make contact, they create a magnetic force that seals the door shut and makes it virtually impossible to open without using a key or using force exerted from outside.

Many magnetic lock systems come with safety features such as audible alarms or remote access which allow you to control when your closet doors are locked or unlocked. You should keep in mind that despite their convenience, magnetic locks do require batteries and will eventually need to be replaced over time. In addition, these locks may not provide enough security for larger sliding closet doors if multiple people will regularly use them.

Installing a Lock

One of the best ways to keep your sliding closet doors locked is to install a door lock. There are several types of locks available for sliding closet doors, including keyed locks, sliding locks, and hook locks. Each type of lock offers distinct advantages in terms of security and convenience, and can be easily installed in minutes. In this article, we’ll walk through the steps for installing a lock on your sliding closet doors.

Measure the door opening

Before you attempt to install a lock on your sliding closet doors, it is important that you measure the door opening correctly. To do this, measure the width of the gap between the two doors. This will give you the dimension of your door opening and will help you choose a lock that will fit comfortably without being too loose or too tight. The height of the door frame should be taken into consideration when selecting a lock since different locks require different heights in order to attach securely. Once an appropriate size has been determined, ensure that all necessary accessories (lock body, strike plate, screws) are included with the product before beginning installation.

Choose the right type of lock

When looking for the right type of lock to secure your sliding closet doors, there are several options available. Popular locks include traditional keyed locks, slide bolts with keyed locking mechanisms, and barrel locks. There are also sliding door locks that can be operated from the interior of the closet without the need for a key.

Slide bolt locks require mounting plate hardware to be screwed into the top or bottom edge of the door frame. These come in a variety of finishes and are easy to install with screws and a screwdriver. Pulling up on the bolt slides it along an interior track and through a hole in the closet frame — preventing anyone from opening it until it is unlocked using a key or some other unlocking mechanism.

Barrel style locks are made up of two cylindrical pieces that fit together and can be secured by inserting a small key. This type of lock is most often seen on full-size doors — they won’t work properly if you try installing them on thinner sliding doors due to their size.

For interior usage, you may want to consider choosing one installed with two openings on either side so that you can use either a key or thumbturn for easy access from either side of the door. There are several types available based on how much security is desired when locked — standard, high-security, and combination style being among them.

It’s important to think about your own security needs and choose a lock accordingly — cheaper knobs may have difficulty resisting breaking and entering attempts while more expensive versions will provide greater levels of protection against intruders. With these considerations in mind, you can find exactly what fits your specific situation best!

Install the lock

For sliding closet doors, a mortise lock is your best bet. This type of lock fits into the door itself and requires the use of a key or combination code to be opened. Installing the hardware is straightforward, but you will need special tools to complete this project. Here are the steps to follow:

1. Measure your doorway and cut a rectangular opening in it that matches the size of your mortise lock using a jigsaw.

2. Insert the lock into the opening and secure it with screws that come with it.

3. Put the strike plate for catch on the opposite side of the door frame and secure with screws as instructed in manufacturer’s instructions.

4. Connect wires from door frame to interior casing if necessary as instructed in manufacturer’s guidelines before finalizing installation.

5. Test fit latch bolt into strike plate by pushing turn handle to ensure that they move freely when connected properly and securely together.

6. Install your exterior trim pieces, knobs or pulls on either side of the doors if desired for aesthetics or convenience (depending on type purchased).

7 . Add any additional locks or security devices needed for added protection according to specific usage requirements or family preferences (i​e.: keyless entry setups may be utilized instead if desired).

Other Ways to Secure Closet Doors

Sliding closet doors are becoming increasingly popular due to their convenience and space-saving abilities. However, there is always a concern over how to keep them secured. There are a variety of options available to keep sliding closet doors locked, ranging from physical locks to digital locks. In this article, we’ll look at some other ways to securely lock your sliding closet doors.

Install a sliding door track

Sliding door tracks are a great way to ensure that your sliding closet doors stay closed and secure. When installed properly, the track will prevent the door from being opened from the outside and keep your possessions safe. Installing a sliding door track is not an overwhelming task, but carpentry skills are helpful if you’re looking for a snug fit.

Measure the doorway opening width to determine how long of a track you need. You may need more than one track if you have double doors that overlap whenever closed. Once your tracks are cut, if necessary, drill pilot holes for screws where the mounting tabs should be placed on each side of each door frame so they can attach to it securely.

Next, place the assembled track on top of the door frame with mounting screws so it fits into its hardware correctly before drilling additional pilot holes and fastening it into place. Finally, install any required locks or stoppers onto the doors or jamb to secure them once they slide together to form a firm barrier. With some patience and attention to detail, you’re sure to create an effective system for keeping your closet doors safely shut!

Untitled design-53

Use a door stop

In addition to using a snib or hook lock to secure your sliding closet doors, you can also use a door stop. A doorstop is an effective way of keeping your sliding closet doors from sliding open too wide. Its primary function is to keep the door from swinging open too far and striking a wall, which could potentially cause damage. To install it, simply push the rubber or plastic tip of the door stop under the track of your sliding closet doors, and it will be kept in place by its friction fit. The installation is simple and quick and does not require any specialized tools or skills. This method does not actually lock your sliding closet doors in place, but will keep them from opening accidentally when they are not in use.

Install a door guard

Installing a door guard is an effective and reliable way to keep your sliding closet doors locked. Door guards are easy to install, and available at home improvement centers in various sizes. Most come with a hole for a padlock, giving you the added security of additional lock protection. To install, place the door guard onto the door track by sliding it in place until it is firmly secured to the floor and the door. You may need to adjust or trim one end so that the guard will fit into the track properly. At this point,you can add a padlock to give your door extra protection if desired.


When it comes to keeping your sliding closet doors locked, regular maintenance and upkeep are key. Sticking with a regular maintenance schedule can help you keep your closet doors in good shape over time, and it can also reduce the chances of any issues with security. In this section, we’ll look at the best ways to maintain and keep your sliding closet doors securely locked.

Regularly check the locks

Sliding closet doors, which can often be made of fragile glass and wooden frames, should be regularly inspected to ensure they remain secure and functioning properly. To prevent a forced entry, check the locks on your sliding closet doors frequently to make sure all screws are tight and there is no evidence of tampering. Be sure to inspect the rollers at the bottom of the sliding door track too – a malfunctioning roller could be a sign that an intruder has tampered with it. If you notice anything suspicious or feel that your locks have been tampered with, contact a professional for assistance in repairing or replacing them.

Untitled design-55

Clean and lubricate the locks

Keeping your locks clean and lubricated is a key step in keeping your sliding closet doors locked. Uneven locks can cause difficulty when turning the key or slipping of the locking plate, which may fail to lock your door securely. Clean and lubricate the locks regularly with an appropriate lock oil or petroleum product to ensure they are working correctly and efficiently. Place a few drops of oil directly into the keyhole and work the key back and forth several times to evenly distribute it over the interior mechanism of the lock. For added security, apply graphite powder on all metal parts inside the lock mechanism. This will not affect how well it works, but will make it harder for potential burglars to pick or manipulate your locks manually.

Replace worn or broken parts

When it comes to maintaining and keeping your sliding closet doors locked, there are a few key steps you should take. One of the most important steps is replacing any worn or broken parts that are critical in keeping your doors secure. As with any mechanical system, wear and tear can cause locking mechanisms to become unreliable over time. Replacing worn or broken parts on your sliding closet doors will help ensure that the door remains secure and closed when desired. Additionally, regular inspection and maintenance is important for helping identify unsafe conditions more quickly.

In cases of very worn or damaged parts on your sliding closet doors, replacing these components in their entirety may be the best option rather than attempting repairs that won’t last in the long term. This could include replacing spring rollers, tracks, locks, vent locks and other components to ensure they are reliable. These replacements should always be done according to the maker’s instructions or guidelines to guarantee optimal functionality once complete. Additionally, if opting for new lock systems and materials altogether it is important to select those that have been tested for safety and acceptability in residential applications.