how to get a stripped screw out of a laptop

How to Get a Stripped Screw Out of a Laptop

Having trouble with a stripped screw in your laptop? Don’t worry, there are other methods you can try to remove it. Dealing with a stripped screw can be frustrating, especially when it’s holding you back from fixing or upgrading your laptop. In this article, I’ll share some alternative techniques that might just do the trick.

One method you can attempt is using rubber bands. Yes, you read that right! Start by placing a wide rubber band over the stripped screw head. The rubber should provide enough grip to turn the screw counterclockwise and loosen it. If this technique doesn’t work initially, try adding more rubber bands for extra traction.

Another option to consider is using pliers or tweezers. Begin by gripping the exposed part of the stripped screw firmly with either tool. Make sure to apply steady pressure as you turn it counterclockwise. Sometimes, a good grip combined with controlled force is all you need to successfully remove a stubborn stripped screw from your laptop.

Applying Heat to Loosen the Screw

When faced with a stubborn stripped screw in your laptop, applying heat can be an effective method to loosen it. One way to do this is by using a hairdryer. By directing hot air onto the screw, you can expand the metal and make it easier to remove.

To start, set your hairdryer on its highest heat setting and position it about 2-3 inches away from the targeted screw. Gently move the hairdryer in a circular motion around the area for about 1-2 minutes. The heat will help expand the metal and break any rust or debris that may be causing resistance.

Once you’ve applied sufficient heat, grab a suitable screwdriver with good grip and attempt to turn the screw counterclockwise. If it still doesn’t budge, consider using additional methods alongside or instead of heat.

Applying Hot Water to Loosen the Screw

Another method that may surprise you is using hot water to loosen a stripped laptop screw. This technique exploits thermal expansion principles similar to those used with a hairdryer.

First, boil some water and pour it into a small container. Make sure not to use too much water; just enough for submerging the tip of your laptop where the troublesome screw is located. Carefully lower your laptop into the hot water so that only the affected area is submerged.

Allow the laptop to sit in hot water for approximately 5-10 minutes. During this time, thermal expansion occurs, which can help separate any corrosion or debris clinging onto the threads of the stripped screw. Afterward, carefully remove your laptop from the water (making sure not to damage any internal components) and try unscrewing it again while applying gentle pressure.

Using a Heat Gun for Stubborn Screws

For particularly stubborn stripped screws that refuse all other attempts at removal, a heat gun can be your secret weapon. A heat gun produces intense hot air and is especially useful for dealing with screws that have been overtightened or corroded over time.

Before using a heat gun, ensure that you have taken all necessary precautions to protect yourself and your laptop. Make sure the area around the screw is clear of any flammable materials, and wear protective gloves and eyewear.

Set the heat gun to a low or medium setting. Hold it about 2-3 inches away from the targeted screw and move it in a circular motion for approximately 1-2 minutes. Be cautious not to concentrate the heat on one spot for too long, as this may damage other components nearby.

Once you’ve heated the screw adequately, try unscrewing it immediately while applying steady pressure with an appropriately sized screwdriver. The combination of heat and pressure should help break loose any stubborn grip on the stripped threads.

Remember, when applying heat to loosen a stripped laptop screw, always exercise caution and avoid overheating sensitive components. If these methods don’t work or if you’re uncomfortable attempting them yourself, consider seeking professional assistance from a qualified technician who can safely remove the stripped screw without causing further damage to your laptop.